Skip to content

OBD-II Connection

Available for: RN LITE, RN ONE MKII, RN PRO

Your Race Navigator not only automatically records GPS position, speed, G-forces and lap times, but can also access other data from your car. This data can be displayed on the display while you are driving and can be viewed in the RN Analyze when you evaluate your laps.

race-navigator-rn-plug-obd2-produkt-01race-navigator-rn-plug-obd2-produkt-01
race-navigator-rn-plug-obd2-produkt-02race-navigator-rn-plug-obd2-produkt-02
race-navigator-rn-plug-obd2-produkt-03race-navigator-rn-plug-obd2-produkt-03

Expand the possibilities of your RACE NAVIGATOR

Your Race Navigator can access a wide range of data via the onboard diagnostic port (OBD2) of your vehicle. Speed, gas pedal position and water temperature can be recorded and displayed.

Simply plug the wireless RN OBD Plug into your vehicle’s OBD2 port and start driving. The connection to your Race Navigator works via Bluetooth. The Race Navigator automatically records the supplied data.

In addition to the wireless standard version, for the RN ONE MKII and RN PRO we also offer an alternative CAN adapter for the OBD2 port. In combination with the RN CAN cable 12V it is possible to connect to the OBD2-port by cable.

RN OBD-II Plug

  • Weight: 32 g
  • Length: 5 cm
  • Width:  2.3 cm
  • Height:  4.5 cm
  • Color:  Black
  • Connects to theOBD-II diagnostics port in the car
  • Wireless communication with Race Navigator via Bluetooth

CAN-Adapter for OBD-II

  • Weight: 75 g
  • Length: 26 cm
  • Color:  Black
  • Available with straight or angled connector
  • Pinout Deutsch Connector DTM06-6S
  • PIN 1: Blue Signal: System GND
  • PIN 4: Brown Signal: System 12V
  • PIN 5: Red Signal: CAN H
  • PIN 6: Black Signal: CAN L
Play Video

CAN-Bus-Connection

Available for: RN ONE MKII, RN PRO

race-navigator-rn-can-bus-produkt-01race-navigator-rn-can-bus-produkt-01
race-navigator-rn-can-bus-produkt-02race-navigator-rn-can-bus-produkt-02
race-navigator-rn-can-bus-produkt-03race-navigator-rn-can-bus-produkt-03

Read out even more car data via CAN-Bus

Both the RN PRO and the current version of the RN ONE have a CAN bus connection. This allows your Race Navigator to read and display data such as RPM, throttle position and water temperature. The CAN bus also provides access to data not available via the OBD II port, such as steering angle, brake pedal position or gear.

Exactly which data can be read out by your Race Navigator via the CAN interface always depends on the individual car model. We would be pleased to advise you individually.

For the CAN bus connection you need the RN 12V CAN cable and a suitable CAN adapter. We offer adapters for various car models.

RN CAN Cable 12V

  • Weight: 155 g
  • Length: 200 cm
  • Pinout Deutsch Connector DTM06-6S
  • PIN 1: Blue Signal: System GND
  • PIN 4: Brown Siganl: System 12V
  • PIN 5: Red Signal: CAN H
  • PIN 6: Black Signal: CAN L
Play Video

NEWSLETTER-ANMELDUNG