OBD-II Connection
Available for: RN LITE, RN ONE MKII, RN PRO
Your Race Navigator not only automatically records GPS position, speed, G-forces and lap times, but can also access other data from your car. This data can be displayed on the display while you are driving and can be viewed in the RN Analyze when you evaluate your laps.
Expand the possibilities of your RACE NAVIGATOR
Your Race Navigator can access a wide range of data via the onboard diagnostic port (OBD2) of your vehicle. Speed, gas pedal position and water temperature can be recorded and displayed.
Simply plug the wireless RN OBD Plug into your vehicle’s OBD2 port and start driving. The connection to your Race Navigator works via Bluetooth. The Race Navigator automatically records the supplied data.
In addition to the wireless standard version, for the RN ONE MKII and RN PRO we also offer an alternative CAN adapter for the OBD2 port. In combination with the RN CAN cable 12V it is possible to connect to the OBD2-port by cable.
RN OBD-II Plug
- Weight: 32 g
- Length: 5 cm
- Width: 2.3 cm
- Height: 4.5 cm
- Color: Black
- Connects to theOBD-II diagnostics port in the car
- Wireless communication with Race Navigator via Bluetooth
CAN-Adapter for OBD-II
- Weight: 75 g
- Length: 26 cm
- Color: Black
- Available with straight or angled connector
- Pinout Deutsch Connector DTM06-6S
- PIN 1: Blue Signal: System GND
- PIN 4: Brown Signal: System 12V
- PIN 5: Red Signal: CAN H
- PIN 6: Black Signal: CAN L
RN OBD-II Plug & CAN-Adapter for OBD-II
- RPMs
- Throttle Position
- Water temperature
RN OBD-II Plug
- Connection to the OBD-II port of your car.
- Wireless communication with Race Navigator
CAN-Adapter for OBD-II
For the use of the CAN adapter the 12V CAN cable is necessary. The 12V CAN cable is connected with one end to the Race Navigator and with the other end to the CAN adapter. The 12V CAN cable is not included and must be ordered separately.
RN OBD-II Plug
Compatible with:
- RN LITE
- RN ONE MKII
- RN PRO
Car must be equipped with OBD-II diagnostics port.
Please note: For the first generation RN ONE (RN ONE MKI) you need the legacy version of the RN Plug (red version).
CAN-Adapter for OBD-II
Compatible with:
- RN ONE MKII
- RN PRO
CAN-Bus-Connection
Available for: RN ONE MKII, RN PRO
Read out even more car data via CAN-Bus
Both the RN PRO and the current version of the RN ONE have a CAN bus connection. This allows your Race Navigator to read and display data such as RPM, throttle position and water temperature. The CAN bus also provides access to data not available via the OBD II port, such as steering angle, brake pedal position or gear.
Exactly which data can be read out by your Race Navigator via the CAN interface always depends on the individual car model. We would be pleased to advise you individually.
For the CAN bus connection you need the RN 12V CAN cable and a suitable CAN adapter. We offer adapters for various car models.
RN CAN Cable 12V
- Weight: 155 g
- Length: 200 cm
- Pinout Deutsch Connector DTM06-6S
- PIN 1: Blue Signal: System GND
- PIN 4: Brown Siganl: System 12V
- PIN 5: Red Signal: CAN H
- PIN 6: Black Signal: CAN L
Exactly which data can be read out by your Race Navigator via the CAN interface always depends on the individual car model. We would be pleased to advise you individually.
Example data:
- RPMs
- Throttle position
- Water temperature
- Oil temperature
- Steering angle
- Brake pedal position
- Gear
Connecting the Race Navigator to the CAN-Bus
In addition to the 12V CAN cable you need a CAN adapter for your car model. The 12V-CAN cable is connected with one end to the Race Navigator and with the other end to the appropriate CAN adapter for your car model.
In addition, the connection can also be made individually and independently without an adapter. We recommend the use of trained personnel for this.
Available car adapters:
- AMG GT4
- BMW M4 GT4
- Lamborghini Huracan GT3 Evo
- Porsche 991 Cup Generation 1
- Porsche 991 Cup Generation 2
- Porsche Cayman GT4 2019
- GT2RS Clubsport 2019
- VAG TCR-Fahrzeuge (AUDI, SEAT, VW)
Compatible with:
- RN ONE MKII
- RN PRO
Car must be equipped with CAN-Bus.
